Right here in the next paragraph you might get a lot of exceptional news when it comes to How to Troubleshoot and Repair an Electric Water Heater.
![](https://www.prattplumbing.net/wp-content/uploads/2020/12/how-to-deal-with-a-delay-in-hot-water-from-a-tankless-water-heaters.jpg)
Numerous modern-day residences make use of an electric water heater for their heating system, due to its convenience and ease of use. However, similar to any other electrical devices, troubles might occur with its usage, all of a sudden. It can be truly discouraging to wake up to a cold shower as opposed to a warm one or having your bath with water that isn't warm adequate or perhaps as well hot. Whatever the case may be, water heater issues can be quite nerve-racking. The good news is, we have actually made a listing of possible services to your hot water heater concerns. There are a number of variables that can trigger a number of these problems, maybe a concern with the power supply, the electrical heating element, or the thermostat. Prior to doing anything, guarantee you shut off the main power supply for safety. Whatever the problem is, getting it taken care of ought to not pose way too much of an issue if you adhere to these actions:
Call An Expert:
If after replacing all damaged parts and resetting your temperature level, the water heater still isn't functioning, you might need to speak to a professional plumber for a professional viewpoint. The issue with your heating unit could be that the hot and cold faucets have been changed or it might be undersized for the amount of warm water needed in your home. Whatever the case might be, an expert plumber would help resolve the problem.
Examine Your Power Supply:
As basic as this might seem, it is very needed. Without sufficient power, your hot water heater will certainly not work. So the first thing to do when your water unexpectedly stops working is to confirm that it isn't a power trouble. Examine if the fuse is blown out or the circuit breaker tripped. If the circuit breaker is the problem, simply turn it off and on once more. Replace any damaged or worn-out fuse. Evaluate the device with power after these adjustments to see if it's currently functioning.
Inspect Your Thermostat:
If your hot water heater still isn't functioning or the water appearing isn't hot enough, you might need to check the temperature settings on your top thermostat. Make certain the circuit breaker is switched off before doing anything. Open the gain access to panel and also press the red switch for temperature reset above the thermostat. This must aid warm the water. Transform the breaker back on and also check if the problem has been settled.
Check the Heating Element in the Water Heater:
If it's not a power issue, then attempt looking into your heating element if it is still functioning. Examine each of your heating elements to ensure the trouble isn't with any one of them. If any one of them is damaged, replace that component and afterwards examine whether the warm water is back on.
Verdict
Water heater problems are not constantly significant. Many of them are due to minor concerns like a blown fuse or damaged burner. Replacing the defective components must work. However, if you are still unable to solve the problem, give a call to your nearest plumber ahead to get it taken care of.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
![](https://i.ytimg.com/vi/5kqGqn0LsQE/mqdefault.jpg)
Hopefully you liked our section on Hot Water Heater Repair. Many thanks for finding the time to browse our content. If you liked our blog posting please be sure to pass it around. Thanks a bunch for your time. Visit again soon.
View More